 |
600-MT Upright
The 600-MT is an accessory used to hold the powerhead upright for
final assembly. This tool is a favorite for any Mercury dealer.
The 600-MT can be used with the 600-A.
|
 |
600B-1
Base Adapter
This bench mount base adapter will hold all lower unit and powerhead
fixtures. The 600B-I is a requirement in order to use our 400 and
600 series.
|
 |
400TR-1 Large Lower Unit
Fork
This tool fits most stern drives and outboards 50 HP and up. The
design allows the swivel pipe to attach to left or right side.
|
 |
400TR-2
Large Lower Unit Fork for Mercruiser, Cobra & Large
Outboards. Steel and adjustable. The Forks spread apart. |
 |
600-SE Small
Engine Bracket
The 600-SE Small Engine Bracket is a small engine bracket to be
used with the 600-B-1 on the bench or motor stand. Capacity: 25
HP
|
 |
600-A
Powerhead Holder
The 600-A Powerhead Holder is used
for outboard powerheads ranging from 35 HP to V-6 outboard
blocks. When using with a 600-B-1, it
can be rotated 360°. For use with the V-6 engines.
|
 |
• 50-A
Kerr Arc Pliers
Micro adjustments for expanding and contracting large snap rings. Improved
Kerr Arc pliers will not twist under strain. One pair of tips are furnished
with pliers.
For replacement tips, order #50-T.
|
 |
• SS-1
Space Saver
The #SS-1 will hold all lower units and stern drives. Pivoting plates
allow bottom to close tight against the skeg for a positive lock. Casters
allow for easy maneuvering. Perfect for storage. Can be bolted together.
|
 |
• 70-C
Combination Puller
This puller is for pulling OMC & Mercury lower unit bearing carriers.
For replacement hooks, order #70 H.
• Replacement
Pilots for #70-C Pullers
#1-OMC #2-OMC V-6 & V-8, Merc.
#3-Merc V-6 #4-Yamaha & Suzukii
|
 |
• 80-A
Prop Puller
This puller is a replacement for the #80 except it uses plates and studs
instead of chains. This one is heavy duty for salt water use.
• 80-A Kit
This kit converts older #80 Prop Pullers to the new 80-A version. Not
pictured.
|
 |
• 400-M
Upper Gearcase Holder
This Upper Gearcase Holder is for Alphas, Bravos, OMC Cobra, Yamaha and
Volvo. Adjustable to fit most stern drives.
|
|
|
